HEIDENHAIN ITNC 530 - CYCLE PROGRAMMING User Manual

58 Using Fixed Cycles
2.3 Pattern Definition PATTERN DEF
2.3 Pattern Definition PATTERN DEF
Application
You use the PATTERN DEF function to easily define regular machining
patterns, which you can call with the CYCL CALL PAT function. As with
the cycle definitions, support graphics that illustrate the respective
input parameter are also available for pattern definitions.
The following machining patterns are available:
PATTERN DEF is to be used only in connection with the tool
axis Z.
Machining pattern Soft key Page
POINT
Definition of up to any 9 machining
positions
Page 60
ROW
Definition of a single row, straight or
rotated
Page 61
PATTERN
Definition of a single pattern, straight,
rotated or distorted
Page 62
FRAME
Definition of a single frame, straight,
rotated or distorted
Page 63
CIRCLE
Definition of a full circle
Page 64
PITCH CIRCLE
Definition of a circular arc
Page 65

HEIDENHAIN ITNC 530 - CYCLE PROGRAMMING Specifications

General

Brand	HEIDENHAIN
Model	ITNC 530 - CYCLE PROGRAMMING
Category	Control Panel
Language	English