Heras HMD Basic

To Next Page

To Previous Page

EN – Translation of the original user manual - 2.0 | 2019

Main Page

Table of Contents3
Foreword6
Preface7
Manufacturer / Supplier7
Service / Maintenance7
Definitions: User / Operator / Engineer7
Prescribed Use / Application8
Conformity with European Directives8
Delivery8
General Information Regarding the Electrical Connections9
Delivery of Drive Unit9
Hmd249
Safety10
Explanation of the Symbols10
Safety Distances10
General Safety Instructions11
Safety Provisions Employed12
Intended Use12
Safety During Use12
Safety During Installation, Maintenance and Disassembly13
Operation14
Opening/Closing Sliding Gate - Normal Use14
Open /Close Sliding Manually15
Motor/Gate Unlocking15
Locking the Motor/Gate15
Description16
Delta16
Safety Edges17
Photocells17
Accessoires17
Loop Detection (Optional)17
Traffic Light (Optional)17
Flash Light (Optional*)17
Remote Control (Optional)18
Operating Modes18
Hold-To-Run-Control18
Automatic Mode18
Automatically Changing Operating Modes19
Control Unit and Display Readings21
Total View of Hmd24 Drive Unit21
Full View of the Control System22
Rotary and Selection Switch23
Lcd Display23
Operating Mode Display24
Sensor Display25
Error/Event Display26
Selecting the Menu System27
Menu System27
Entering the Password27
Menu Overview28
Menu Structure, Displayed Texts and References30
Setting the National Language35
Installation of the Control System35
Electrical Connection35
Power Supply from the Electricity Grid36
Connection of the Motor36
Connecting the Inputs and Outputs36
Supply of External Devices with 24 VDC37
Operating Devices and Limit Switches38
Limit Switches39
Operating Keys for Hold-To-Run Operation39
Stop Function40
Operating Keys OPEN40
Operating Keys CLOSE40
Setting up the Partopen Function (Pedestrian Passage)41
Control Element Switchover Impulse Pushbutton (Toggle)41
Fixed Safety Contact Strips42
Indus System with Accompanying Safety Contact Strips42
Fixed Safety Contact Strips (SKL)43
Accompanying Safety Contact Strips (ISK)43
Light Barrier43
Connecting a Light Barrier44
Overview Installation Plan of the Inputs45
Relay Outputs45
Radio Receiver and Arial46
Programming and Settings48
Changing the Direction of Rotation of the Drive48
Connection of a Jcm Radio System48
Operating Functions at the Inputs In3 and In450
Reference Run51
Connecting Flashlights52
Gate Status Indications53
Setting the Timers53
Hold-Open Time53
Closure from the Partopen Position54
Closing from Intermediate Positions54
Closing Run Shortening with a Light Barrier55
Slow Movement before the Limit Positions55
Maintenance Events55
Cycle Counter56
Motor Runtime Counter56
Maintenance Interval56
Maintenance Request with Flashlight57
Reset Maintenance Request57
Backing up Parameters58
Reloading Parameters58
Radio Remote Control58
Displaying the Number of Transmitters59
Registering New Transmitters59
Registering Key Functions60
Deleting a Transmitter61
Deleting a Transmission Location61
Deleting All Transmitters62
Diagnostic Support62
Version Display62
Gate Status Display63
Sensor Status64
Temperature Status64
Motor Current Display64
Log System64
Faults66
Defective Photocell or Safety Edge66
Parameters Reference/Error Numbers66
Emergency Stop70
Maintenance Instructions70
Gate Maintenance70
Drive Unit Maintenance71
Cleaning71
Decommissioning and Removal72
Spare Parts72
Technical Data73
Sliding Gate Description73
Drive Description73
Appendix A: Declarations Dop / Doc75
Appendix B: Electric Diagram Hmd2477

Heras HMD Basic - Page 2

Table of Contents

Related product manuals