Heras HMD Basic - Preface; Manufacturer; Supplier; Service; Maintenance; Definitions: User; Operator; Engineer

EN – Translation of the original user manual - 2.0 | 2019
7
1 PREFACE
1.1 MANUFACTURER / SUPPLIER
Manufacturer:
Heras B.V.
Hekdam 1, 5688 JE Oirschot
Netherlands
Tel.: +31(0)499-551225
www.heras.com
Technical Construction File: Heras B.V. manager, T&I Department
1.2 SERVICE / MAINTENANCE
In the event of problems, failures or questions you can contact:
Heras Netherlands
Telephone
+31(0) 499 551 255
Heras Germany
Telephone
+49 (0)1805 437277
Heras UK
Telephone
+44(0) 1302 364 551
Heras France
Telephone
+33(0) 3 88 067 000
Heras Norway
Telephone
+47(-) 22 900 555
Heras Sweden
Telephone
+46(0) 77 1506050
1.3 DEFINITIONS: USER / OPERATOR / ENGINEER
User: Anyone using the gate.
Operator: A user who is familiar with all safety aspects dealt with in this
manual. Operators are not allowed to carry out any installation work
on the gate unless explicitly specified.
Engineer: The engineer is a Heras fitter (or an engineer employed by the
customer who has been given explicit permission in writing from
Heras) who is qualified to perform technical interventions on the
gate.