EN ā Translation of the original user manual - 2.0 | 2019
DECOMMISSIONING AND REMOVAL 11
Ensure that the gate is dismantled by a qualified technician.
Disconnect the electricity supply in a safe way from the drive unit.
Use the installation manual.
At the end of their service lives the products must be disposed of in accordance
with all local, regional and national rules and instructions. The sliding part is
mainly made of aluminum parts. The guideposts are made of steel.
Heras is also happy to take the products back and then dispose of them in an
appropriate manner.
The Delta gate has highly tensioned cables fitted in the bottom rail. If these
cables are cut, they can snap with great force. This can lead to serious
injury. Therefore, it is prohibited to disassemble the bottom rail
yourself.
!! Only people trained by Heras are allowed to disassemble the
bottom rail.
There is no hidden danger associated with dismantling the bars, top rail and
stiles.
The points that are fitted to some sliding gates are sharp. There is a danger
of being cut when disassembling such a gate. Wear suitable gloves.
SPARE PARTS 12
Safety fuses (KFZ Standard plug-in fuses)
F1 Blade-type plug-in fuse 10 A (red)
F2 Blade-type plug-in fuse 1 A (black)
To Next Page
Loading...
