Network Video Recorder User Manual
101
Configure Recording Schedule
Purpose:
Set the record schedule, and then the camera automatically starts/stops recording according to the
configured schedule.
Before you start
Make sure you have installed the HDDs to the device or added the network disks before you
storing the video files, pictures and log files.
Refer to the Quick Start Guide for the HDD installation.
Refer to Chapter 7.1.2 Add the Network Disk for network HDD connections.
Go to Storage > Recording Schedule.
Recording Schedule
Select a camera.
Check Enable Schedule.
Select a record type. The record type can be Continuous, Motion Detection, Alarm,
Motion | Alarm, Motion & Alarm, and Event.
Different recording types are configurable.
To Next Page
Loading...
