Network Video Recorder User Manual
140
Configure Alarm Output
Purpose:
Trigger an alarm output when an alarm is triggered.
Go to System> Event>Normal Event>Alarm Output.
Select an alarm output item from the list and click .
Edit Alarm Name.
Select Dwell Time (the alarm duration) from 5s to 600s, or Manually Clear.
Manually Clear: You should manually clear the alarm when the alarm occurs. Refer to
Chapter 11.8 Trigger or Clear Alarm Output Manually for detailed instructions.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Alarm Output
(Optional) You can click Copy to copy the same settings to other alarm output (s).
Click Apply.
To Next Page
Loading...
