Network Video Recorder User Manual
201
Chapter 18 General System Settings
Configure General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed through
the System > General interface.
Go to System > General.
General Settings Interface
Configure the following settings.
Language: The default language used is English.
Output Standard: Select the output standard to NTSC or PAL, which must be the same with
the video input standard.
Resolution: Configure the resolution of the video output.
Device Name: Edit the name of the device
Device No.: Edit the serial number of the device. The Device No. can be set in the range of
1~255, and the default No. is 255. The number is used for the remote and keyboard control.
Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5
Minutes, then the system will exit from the current operation menu to live view screen after
5 minutes of menu inactivity.
To Next Page
Loading...
