Digital Video Recorder User Manual
126
Figure 8-10 Video Loss Setup Interface
Step 2 Select a Camera you want to detect.
Step 3 Set up handling method of video loss.
Check the checkbox of Enable Video Loss Alarm.
Click button to set up handling method of video loss.
Step 4 Set arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day. Or you
can click the Copy button to copy the time period settings to other day(s).
Time periods shall not be repeated or overlapped.
Figure 8-11 Set Arming Schedule of Video Loss
Repeat the above steps to set arming schedule of other days of a week. You can also use
Copy button to copy an arming schedule to other days.
To Next Page
Loading...
Need help?
General