Network Video Recorder User Manual
194
Upgrade System
Purpose:
The firmware on your device can be upgraded by local backup device or remote FTP server.
Upgrade by Local Backup Device
Before You Start:
Connect your device with a local storage device with update firmware file.
Go to Maintenance > Upgrade > Local Upgrade to enter the local upgrade interface.
Local Upgrade Interface
Select the update file from the storage device.
Click Upgrade to start upgrading.
After the upgrading is complete, the device will reboot automatically to activate the
new firmware.
Upgrade by FTP
Before you start:
Ensure the network connection of the PC (running FTP server) and the device is valid and correct.
Run the FTP server on the PC and copy the firmware into the corresponding directory of your PC.
Go to Maintenance > Upgrade > FTP to enter the local upgrade interface.
To Next Page
Loading...
