Digital Video Recorder User Manual
91
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD
property to Redundant. For detailed information, please refer to Chapter 13.3 Managing HDD
Group. There should be at least another HDD which is in Read/Write status.
Step 1 Go to Menu > HDD.
Figure 5-25 HDD General
Step 2 Select the HDD and click to enter the Local HDD Settings interface.
1) Set the HDD property to Redundant.
Figure 5-26 HDD General-Editing
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
Step 3 Go to Menu > Record > Parameters > Record.
1) Select Camera you want to configure.
2) Click More Settings button.
To Next Page
Loading...
Need help?
General