Digital Video Recorder User Manual
57
Start recording of all channels, Continuous Record and
Motion Detection Record are selectable from the drop-down
list.
A shortcut to enter the IP camera management interface.(For
HDVR series only)
Enter the playback interface and start playing back the video
of the selected channel immediately.
A shortcut to enter the PTZ control interface of the selected
camera.
Output Mode is configurable with Standard, Bright, Gentle
and Vivid options.
Switch to the auxiliary output mode and the operation for the
main output is disabled.
If you enter Aux monitor mode and the Aux monitor is not connected,
the mouse operation is disabled. You need to switch back to the Main
output with the F1 button on front panel or VOIP/MON button on IR
remote control and then press the Enter button.
Figure 3-1 Right-click Menu
3.2.2 Switching Main/Aux Output
To Next Page
Loading...
Need help?
General