DS-7600 Series NVR User’s Manual
102
Viewing System Logs
Many events of your NVR are logged into the system logs. To access the system logs and search for these
events:
1. Enter the System Logs menu, shown in Figure 102 by going to Menu > Maintenance > System
Logs.
Figure 102 System Logs Menu
2. Select the Start Time and the End Time.
3. Select the Major Type from the dropdown list. Four major types are available: Alarm, Exception,
Operation and Information. You can also select All.
4. Select the Minor Type under the Major Type to efficiently find the logs.
5. Click the Search button. The search results will be displayed in a list (Figure 103). Click
to page up and down.
Note:
Up to 2000 log files can be displayed each time.
To Next Page
Loading...
Need help?
General
