DS-7600 Series NVR User’s Manual
64
3. Click Yes to confirm the deletion of user or click No to cancel.
Editing a User
To edit a user:
1. Enter the User menu, shown in Figure 52 by going to Menu > System Configuration > User.
2. Select a user and click to edit user.
3. Edit user information including user name, password, level and MAC address.
4. Click the OK button to save and exit.
Note:
User password can be both numbers and characters. You can click the button on the password
editable fields to enter characters.
Switch User
On the main menu (see in Figure 59), information about users are show on the lower left
corner, , click to switch users.
Figure 59 Main Menu