DS-7600 Series NVR User’s Manual
88
Configuring Quota Mode
Each camera can be configured with allocated quota for record.
To configure quota mode:
1. Enter the quota mode menu by going to Menu > System Configuration > HDD.
2. Select the Storage Mode tab, as shown in Figure 89.
Figure 89 Quota Mode Settings Menu
3. Select the Mode to Quota.
4. Select a camera for which you want to configure quota.
5. Enter the storage capacity in the text fields of Max. Record Capacity (GB).
6. If the same settings can be applied in other channels, click Copy and select the corresponding
channels.
7. Click the Apply button to save the settings.
Note:
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record.
Managing HDD Group
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings. To managing HDD Group:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Storage Mode tab, as shown in Figure 89.
3. Select the Mode to Group, as shown in Figure 90.
To Next Page
Loading...
Need help?
General
