DS-7600 Series NVR User’s Manual
91
HDD Detect
The device provides the HDD detection function such as the adopting of the S.M.A.R.T. and the Bad
Sector Detection technique.
S.M.A.R.T
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD
to detect and report on various indicators of reliability in the hopes of anticipation failures.
Figure 93 S.M.A.R.T. Settings Interface
To viewing S.M.A.R.T. information:
1. Enter the S.M.A.R.T. Settings interface by going to Menu > System Maintenance > HDD Detect.
2. Select the S.M.A.R.T. Settings tab, as shown in Figure 93.
3. Select a HDD to view its S.M.A.R.T. information list.
4. You can choose the Self-test Type from the dropdown list, including Short Test, Expanded Test
and Conveyance Test.
5. Click the Test button to start the S.M.A.R.T. HDD self-evaluation.
Note:
If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the checkbox of
the Continue to use this disk when self-evaluation is failed item.
Bad Sector Detection
1. Enter the Bad Sector Detection menu by going to Menu > System Maintenance > HDD Detect.
2. Select the Bad Sector Detection tab, as shown in Figure 126.
To Next Page
Loading...
Need help?
General
