DS-7600 Series NVR User’s Manual 
 
51 
 
Backing up Video Clips 
Video clips can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer. 
Selecting Video Clips 
Video clips can be selected for backup in the Playback Interface using the controls found in the Mark Clip 
For Export panel, shown in Figure 41. 
 
Figure 41  Mark Clip For Export Controls 
 
The controls found in the Mark Clip For Export panel include: 
  Start/Stop Button: Mark the starting/ending point for the video clip. When you click the 
Start, it will turn to the Stop button. 
  Play Button: Play the selected video clip. 
  Save Button: Save the selected video clip to HDD. 
  Clear Button: Clear the selected video clip. 
 
To select video clips in the Playback Interface: 
1.  Enter the Playback Interface, shown in Figure 42, by going to Menu > Playback > Record. 
 
Figure 42  Playback Menu 
 
2.  Search for the recorded files that you would like to select video clips from (See Searching for 
Recorded Files on Page 47). Video clips can only be selected in single playback mode. 
3.  Select the starting position of the video clip by clicking the desired location on the blue 
recordings bar.