HIKVISION DS-7600NI-SE/P Series User Manual

DS-7600 Series NVR User’s Manual
92
Figure 94 Bad Sector Detection Interface
3. Select the HDD you want to configure in the dropdown list.
4. Choose Full Detection or Key Area Detection.
5. Click the Detect button to start the detection.
6. Click the Pause/Cancel button to pause/cancel at any time you want.
7. If the HDD is normal you can see the green color icon on the screen, while red means damaged
and yellow means shield.
8. Click the Error Info to see the detail damage or shield information.

HIKVISION DS-7600NI-SE/P Series Specifications

General

Brand	HIKVISION
Model	DS-7600NI-SE/P Series
Category	Network Hardware
Language	English