DS-7600 Series NVR User’s Manual
106
6. You can click the Network button to check the network information and you can configure the
network settings in this interface
Figure 109 Network Settings Menu
To export network packet:
By connecting the NVR to network, the captured network data packet can be exported to USB-flash disk,
SATA CD-RW and other local backup devices.
1. Enter the Network Detection menu by going to Menu > Maintenance > Network Detection.
2. Select the Network Detection tab to enter the Network Detection menu.
3. Click the Export button to start exporting.
4. After the exporting is complete, click OK to finish the packet export, as shown in Figure 110.
Figure 110 Export Process Bar
Note:
Click the Refresh button if the connected local backup device cannot be displayed. When it fails to detect
the backup device, please check whether it is compatible with the NVR. You can format the backup
device if the format is incorrect.
To view network status:
1. Enter the Network Stat. menu by going to Menu > Maintenance > Network Detection.
2. Select the Network Stat. tab to enter the Network Stat. menu, as shown in Figure 111.
To Next Page
Loading...
Need help?
General
