HIKVISION DS-7600NI-SE/P Series User Manual

DS-7600 Series NVR User’s Manual
35
Figure 26 Camera Order Settings Menu
To set the camera order:
1. Enter the View menu, shown in Figure 26 by going to Menu > System Configuration > Live
View > View.
2. Select the Screen Configuration you would like to use in Live Feed by clicking .
The preview of the screen configuration on the right will change depending on the option
selected.
3. Click to select a screen in the right region and double-click to select a channel in the left region.
Thus the selected channel will be displayed in the corresponding screen.
Note:
means no channel will be displayed in this screen.
4. Click to start live view of all channels and click to stop live view all channels. Click
or to go to the previous or next page. For example, in 2x2 screen configuration mode,
pressing the Next button will bring up the next set of 4 displays.
5. Click the Apply button to save the settings.
6. Click to exit out of the menu.

HIKVISION DS-7600NI-SE/P Series Specifications

General

Brand	HIKVISION
Model	DS-7600NI-SE/P Series
Category	Network Hardware
Language	English