HIKVISION DS-K1T321 Series - 3.3 Surface Mounting

Figure 3-4 Secure Device
3.3 Surface
Mounng
Steps
Note
The addional force shall be equal to three mes the weight of the equipment. The equipment ad
its associated mounng means shall remain secure during the installaon. Aer the installaon,
the equipment, including any associated mounng plate, shall not be damaged.
1.
Secure the mounng plate on the wall with the 4 supplied screws (SC-KA4X22).
DS-K1T321 Series Face Recognion Terminal
7