HIKVISION DS-K1T321 Series User Manual

7.2.2 Set Wi-Fi Parameters
You can enable the Wi-Fi funcon and set the Wi-Fi related parameters.
Steps
Note
The funcon should be supported by the device.
1.
Select Basic → Comm. (Communicaon) to enter the Communicaon sengs page.
2.
On the
Communicaon sengs page, select Wi-Fi.
Figure 7-3 Wi-Fi Sengs
DS-K1T321 Series Face Recognion Terminal
27

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English