HIKVISION DS-K1T321 Series User Manual

Set the matching value when authencang with face mask via 1:1 matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate.
Face with Mask 1:N Matching Threshold
Set the matching threshold when authencang with face mask via 1:N matching mode. The
larger the value, the smaller the false accept rate and the larger the false rejecon rate.
Fingerprint Security Level
You can set the security level of
ngerprint. The higher the security level you set, the lower the
False Acceptance Rate (FAR) will be. The higher the security level you set, the lower the False
Rejecon Rate (FRR) will be.
Set Recognion Area
Tap Conguraon → Smart → Area Conguraon to enter the page.
Drag the blue frame in the live video to adjust the recognion area. Only the face within the area
can be recognized by the system.
Drag the slider to
congure the eecve area of face recognion.
Tap Save to save the sengs.
8.4.11 Access Control
Sengs
Set Door Parameters
Tap Conguraon → Access Control → Door Parameters .
DS-K1T321 Series Face Recognion Terminal
73

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English