HIKVISION DS-K1T321 Series

Note
If the device is not acvated by other tools, the device uses indoor as the environment mode by
default.
Face Recognion Mode
Normal Mode
The device uses a camera to perform face recognion.
The device uses a camera to perform face recognion.
Connuous Face Recognion Interval (s)
Set the me interval between two connuous face recognions when authencang.
Note
Value Range: 1 to 10.
1:1 Matching Threshold
Set the matching threshold when authencang via 1:1 matching mode. The larger the value,
the smaller the false accept rate and the larger the false rejecon rate.
1:N Matching Threshold
Set the matching threshold when authencang via 1:N matching mode. The larger the value,
the smaller the false accept rate and the larger the false
rejecon rate. The maximum value is
100.
Face Recognion Timeout Value (s)
Congure the meout period for face recognion. If the face recognion me exceeds the
congured value, the device will prompt the face recognion meout.
Face with Mask Detecon
Aer enabling the face with mask detecon, the system will recognize the captured face with
mask picture. You can set face with mask1:N matching threshold, its ECO mode, and the
strategy.
None
If the person do not wear a face mask when
authencang, the device will not prompt a
nocaon.
Reminder of Wearing
If the person do not wear a face mask when authencang, the device prompts a
nocaon and the door will open.
Must Wear
If the person do not wear a face mask when authencang, the device prompts a
nocaon and the door keeps closed.
Face with Mask & Face (1:1)
DS-K1T321 Series Face Recognion Terminal
72