HIKVISION DS-K1T321 Series

Figure 10-3 Time Sengs
Click Save to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's
me.
Server Address Type/Server Address/NTP Port/Interval
You can set the server address type, server address, NTP port, and interval.
10.6.4 Set DST
Steps
1.
Click
Conguraon → System → System Sengs → Time Sengs .
DS-K1T321 Series Face Recognion Terminal
85