HIKVISION DS-K1T321 Series

If disable DHCP, you should set the IP address, the subnet mask, and the gateway.
Wi-Fi
Select a Wi-Fi and enter the Wi-Fi's password to get connected.
Or select Add Wi-Fi and enter the Wi-Fi's name and the password to get connected.
3.
Oponal: Select Back to skip network sengs.
6.3 Access to Plaorm
Enable the funcon and the device can communicate via Hik-Connect. You can add the device to
Hik-Connect modile client and so on.
Steps
1.
Enable Access to Hik-Connect, and set the Server IP and
Vericaon Code.
2.
Tap Next.
6.4 Privacy
Sengs
Aer acvaon, selecng network, you should set the privacy parameters, including the picture
uploading and storage.
Select parameters according to your actual needs.
DS-K1T321 Series Face Recognion Terminal
21