You can view the device name, device No., language, model, serial No., version, device capacity,
etc.
8.4.2 Time Sengs
Set the me zone, me sync. mode, and displayed me.
Tap Conguraon → System → System Sengs → Time Sengs to enter the sengs page.
Figure 8-3 Time Sengs
Tap Save to save the sengs.
Time Zone
Select the
me zone where the device is located from the drop-down list.
Time Sync. Mode
Manual
By default, the device me should be synchronized manually. You can set the device me
manually.
NTP
Set the NTP server's IP address, port No., and interval.
DS-K1T321 Series Face Recognion Terminal
58