HIKVISION DS-K1T321 Series

Figure 8-9 Card Authencaon Page
Select a card authencaon mode and tap Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
The device will read card via Wiegand 26 protocol (read 3 bytes).
Wiegand 34 (4 bytes)
The device will read card via Wiegand 34 protocol (read 4 bytes).
8.4.10 Face Parameters
Sengs
Set face parameters.
Face Parameters
Sengs
Tap Conguraon → Smart → Intelligent Parameter .
DS-K1T321 Series Face Recognion Terminal
70