HIKVISION DS-K1T321 Series User Manual

Note
20 s to 999 s are available to congure.
Select Language
Select the language according to actual needs.
Supplement Light
Set the white light mode, brightness, start me and end me.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
7.7 Set Biometric Parameters
You can customize the face parameters to improve the face recognion performance. The
congurable parameters includes applicaon mode, face liveness level, face recognion distance,
face
recognion interval, face 1:N security level, face 1:1 security level and face with mask
detecon.
Long press OK and login the device. Select Basic to enter System Sengs page. Then select
Biometrics to enter Biometrics sengs page.
Table 7-1 Face Picture Parameters
Parameter Descripon
Applicaon Mode Select either others or indoor according to actual environment.
Face Liveness Level Aer enabling face an-spoong funcon, you can set the matching
security level when performing live face authencaon.
Face Recognion
Distance
Set the valid distance between the user and the camera when
authencang.
Face Recognion
Interval
The me interval between two connuous face recognions when
authencang.
Note
You can input the number from 1 to 10.
DS-K1T321 Series Face Recognion Terminal
43

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English