HIKVISION DS-K1T321 Series User Manual

8.4.4 View Open Source Soware License
Tap Conguraon → System → System Sengs → About , and tap View Licenses to view the
device license.
8.4.5 User Management
Steps
1.
Tap Conguraon → System → User Management → admin → Modify Password to enter the
seng page.
2.
Enter the old password and create a new password.
3.
Conrm the new password.
4.
Tap OK.
Note
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using 8-16 characters, including at least two kinds
of following categories: upper case leers, lower case leers, numbers, and special characters)
in order to increase the security of your product. And we recommend you change your password
regularly, especially in the high security system, changing the password monthly or weekly can
beer protect your product.
8.4.6 Upgrade and Maintenance
Reboot device, restore device parameters, upgrade device version and unlink the app.
Reboot Device
Tap Conguraon → System → Maintenance .
Tap Reboot to reboot the device.
Upgrade
Tap Conguraon → System → Maintenance .
If the device has been connected to Hik-Connect and network, when there is a new
installaon
package in Hik-Connect, you can tap Upgrade aer Online Update to upgrade the device system.
Note
Do not power o during the upgrading.
Restore Parameters
Tap Conguraon → System → Maintenance .
Default
DS-K1T321 Series Face Recognion Terminal
60

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English