HIKVISION DS-K1T321 Series

Parameter Descripon
Face 1:N Security Level Set the matching threshold when authencang via 1:N matching mode.
The larger the value, the smaller the false accept rate and the larger the
false rejecon rate.
Face 1:1 Security Level Set the matching threshold when authencang via 1:1 matching mode.
The larger the value, the smaller the false accept rate and the larger the
false rejecon rate.
Face with Mask
Detecon
Aer enabling the face with mask detecon, the system will recognize
the captured face with mask picture. You can set face with mask & face
1:1 level and 1:N level and the strategy.
Reminder of Wearing
If the person do not wear a face mask when authencang, the
device prompts a
nocaon and the door will open.
Must Wear
If the person do not wear a face mask when authencang, the
device prompts a nocaon and the door keeps closed.
None
If the person do not wear a face mask when authencang, the
device will not prompt a
nocaon.
7.8 Set Access Control Parameters
You can set the access control permissions, including the funcons of authencaon mode, enable
NFC card, door contact, open duraon (s) and authencaon interval (s).
On the home page, select ACS (Access Control
Sengs) to enter the Access Control Sengs page.
Edit the access control parameters on this page.
DS-K1T321 Series Face Recognion Terminal
44