HIKVISION DS-K1T321 Series User Manual

Note
●
The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper leers, and numbers.
●
The employee ID should not be duplicated.
4.
Select the Name eld and input the user name on the keyboard.
Note
●
Numbers, upper case leers, lower case leers, and special characters are allowed in the user
name.
●
Up to 128 characters are allowed in the user name.
5.
Oponal: Add a face picture, ngerprints, cards, or Pin for the user.
Note
●
For details about adding a face picture, see Add Face Picture .
●
Note
For details about adding a ngerprint, see Add Fingerprint .
●
For details about adding a card, see Add Card .
●
For details about adding a password, see View PIN code .
6.
Oponal: Set the user's authencaon type.
Note
For details about seng the authencaon type, see Set Authencaon Mode .
7.
Set the user role.
Administrator
The user is the administrator. Except for the normal
aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Normal User
The User is the normal user. The user can only authencate or take aendance on the inial
page.
8.
Press ESC and then press OK to save the sengs.
7.3.2 Add Face Picture
Add user's face picture to the device. And the user can use the face picture to
authencate.
Steps
Note
Up to 500 face pictures can be added.
DS-K1T321 Series Face Recognion Terminal
32

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English