HIKVISION DS-K1T321 Series

You can view the number of user, face picture, card, and event.
Note
Parts of the device models support displaying the ngerprint number. Refers to the actual page
for details.
Device Upgrade
Plug the USB ash drive in the device USB interface. Select Upgrade → OK , and the device will
read the digicap.dav
le in the USB ash drive to start upgrading.
Restore to Factory Sengs
All parameters will be restored to the factory sengs. The system will reboot to take eect.
Restore to Default Sengs
All parameters, except for the communicaon sengs, remotely imported user informaon, will
be restored to the default sengs. The system will reboot to take eect.
Reboot
The device will reboot aer the conrmaon.
Select , long press OK, and enter admin password to view device version informaon.
DS-K1T321 Series Face Recognion Terminal
53