HIKVISION DS-K1T321 Series User Manual

Figure 8-1 Add User
2) Set the following parameters.
Employee ID
Enter the employee ID. The employee ID cannot be 0 or exceed 32 characters. It can be a
combinaon of uppercase, lowercase leers and numbers.
Name
Enter the name. The name supports numbers, uppercase and lowercase English, and
characters. The name is recommended to be within 32 characters.
Gender
Select the gender.
User Role
Select your user role.
Floor No./Room No.
Enter the
oor No./room No.
Face
Add Face picture. Tap Face, then tap Import, and select the mode to import the face.
Card No.
Enter the card No.
DS-K1T321 Series Face Recognion Terminal
55

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English