HIKVISION DS-K1T321 Series

Add the person's basic informaon, including the employee ID, the person's name, the gender, and
person type.
If you select Visitor as the person type, you can set the visit mes.
Click Save to save the sengs.
Set Permission Time
Click Person Management → Add to enter the Add Person page.
Enable Long-Term Eecve User, or set Start Time and End Time and the person can only has the
permission within the congured me period according to your actual needs.
Click Save to save the sengs.
Set Room No.
Click
Person Management → Add to enter the Add Person page.
Click Add to add the Floor No. and Room No..
Click
to delete it.
Click Save to save the sengs.
Authencaon
Sengs
Click Person Management → Add to enter the Add Person page.
Set the authencaon type.
Click Save to save the
sengs.
Add Card
Click Person Management → Add to enter the Add Person page.
Click Add Card, enter the Card No. and select the Property, and click Save to add the card.
Click Save to save the
sengs.
Add Fingerprint
Note
Only devices supporng the ngerprint funcon can add the ngerprint.
Click Person Management → Add to enter the Add Person page.
Click Add Fingerprint, and press your
nger on the ngerprint module of the device to add your
ngerprint.
Click Save to save the sengs.
Add Face Picture
Click Person Management → Add to enter the Add Person page.
Click + on the right to upload a face picture from the local PC.
Note
The picture format should be JPG or JPEG or PNG, and the size should be less than 200 K.
DS-K1T321 Series Face Recognion Terminal
82