Network Speed Dome User Manual
33
Expert
Set the DNR level for both space DNR and time DNR to control the noise reduction degree. The
higher level means stronger reduction degree.
Defog
You can enable the defog function when the environment is foggy and the image is misty. It
enhances the subtle details so that the image appears clearer.
EIS
Increase the stability of video image by using jitter compensation technology.
5.6.2 Image Parameters Switch
The device automatically switches image parameters in set time periods.
Go to image parameters switch setting page: Configuration → Image → Image Parameters Switch,
and set parameters as needed.
Set Switch
Switch the image parameters to the scene automatically in certain time periods.
Steps
1. Check Enable.
2. Select and configure the corresponding time period and the scene.
Note
For the scene configuration, refer to Scene Mode.
3. Click Save.
Set Link to Preset
You can set a preset to switch the image to a linked scene.
Steps
1. Check Link to Preset.
2. Select a preset.
3. Check and set a time period and a linked scene mode.
4. Click Save.
5.6.3 Mirror
When the live view image is the reverse of the actual scene, this function helps to display the
To Next Page
Loading...
Need help?
General
