HIKVISION HWP-N2404IH-DE3 - View Open Source Software License; Set Live View Connection; Time and Date; Synchronize Time Manually

Network Speed Dome User Manual
80
Firmware
Locate the exact path of the upgrade file.
Firmware Directory
Locate the directory which the upgrade file belongs to.
3. Click Browse to select the upgrade file.
4. Click Upgrade.
10.8 View Open Source Software License
Go to Configuration → System → System Settings → About Device, and click View Licenses.
10.9 Set Live View Connection
It controls the remote live view connection amount.
Live view connection controls the maximun live view that can be streamed at the same time.
Enter Configuration → System → Maintenance → System Service to set the upper limit of
the remote connection number.
10.10 Time and Date
You can configure time and date of the device by configuring time zone, time synchronization and
Daylight Saving Time (DST).
10.10.1 Synchronize Time Manually
Steps
1. Go to Configuration → System → System Settings → Time Settings.
2. Select Time Zone.
3. Click Manual Time Sync..
4. Choose one time synchronization method.
– Select Set Time, and manually input or select date and time from the pop-up calendar.
Check Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.
10.10.2 Set NTP Server
You can use NTP server when accurate and reliable time source is required.
Before You Start
Set up a NTP server or obtain NTP server information.