Network Speed Dome User Manual
34
image normally.
Select the mirror mode as needed.
Note
The video recording will be shortly interrupted when the function is enabled.
5.6.4 Video Standard
Video standard is an ability of a video card or video display device that defines the amount of
colors that are shown and the resolution. The two most common video standard used are NTSC
and PAL. In NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual
scan lines. In PAL, 25 frames are transmitted each second. Each frame is made up of 625 individual
scan lines. Select video signal standard according to the video system in your country/region.
5.6.5 Zoom Limit
You can set a certain value to limit the maximum value of zooming.
5.7 OSD
You can customize OSD (On-screen Display) information such as device name, time/date, font,
color, and text overlay displayed on video stream.
Go to OSD setting page: Configuration → Image → OSD Settings. Set the corresponding
parameters, and click Save to take effect.
Character Set
Select character set for displayed information. If Korean is required to displayed on screen, select
EUC-KR. Otherwise, select GBK.
Displayed Information
Set camera name, date, week, and their related display format.
Text Overlay
Set customized overlay text on image.
OSD Parameters
Set OSD parameters, such as Display Mode, OSD Size, Font Color, and Alignment.
5.8 Demist
Demist is to remove the condensation on the lens and the glass window.
Enter the OSD menu and go to System Settings → System Info Settings → Demist to select a
To Next Page
Loading...
Need help?
General
