Hioki RM3545-02 - Increasing the Precision of the 100 MΩ Range (100 MΩ High-Precision Mode)

4.13 Increasing the Precision of the 100 M Range (100 M High-precision Mode)
96
The precision of the 100 M range can be increased.
Turning on high-precision mode has the following effects:
• The 1,000 M range will be unavailable for use.
• More time will be required for measured values to stabilize. To adjust the time required
until values stabilize, set a delay.
See: "4.9 Setting Pre-Measurement Delay" (p.84)
4.13 Increasing the Precision of the 100 M
Range (100 M High-precision Mode)
1
Open the Settings Screen.
2
Open the Measurement Setting Screen.
3
Turn on 100 m range high-precision mode.
4
Return to the Measurement screen.
The Settings screen
appears.
Switch the function menu
to P.2/3.
1
2
Move the cursor to the
[MEAS] tab with the left and
right cursor keys.
2
Enables the 100 M high-
precision mode
Disables the 100 M high-
precision mode
Selection
1
Return to the
Measurement screen.