Hioki RM3545-02 - Panel Load Timing

10.2 Timing Chart
195
10
When using the multiplexer, set the MUX signal to ON.
(1) When using the TRIG signal
(2) When not using the TRIG signal
Processing time
Panel Load Timing
Panel 1 to 30 Approx. 100 ms
Panel 31 to 38 Approx. 200 ms
LOAD0 to LOAD5 Panel 1
TRIG
ON
State
EOM
Load processing
Panel 2
Measurement
OFF ON
Panel 1 Panel 2
Within 10 ms
Panel 2
Processing time
LOAD0 to LOAD5
Approx.
10 ms
State
Panel 1 Panel 2
Load processing
Panel 1
Panel 2
Processing time