Hioki RM3545-02 - Compliant Resistance Measure- Ment

1.4 Screen Organization and Operation Overview
28
When the scan function is set to auto or step (RM3545-02 only)
Channel number
Total judgment result
Individual channels’ measured value
Individual channels’ comparator result
(If a measured value fault occurs, a description of the error is displayed.)
Individual channels’
PASS/FAIL judgment re-
sult (If a measured value
fault occurs, ”---” is dis-
played.)
Overview of screen operation
Menu switching
(4) To Settings screens
(1) Measurement screen
(2) Comparator Settings screen
Upper limit
value
Lower limit
value
(3) Panel Save/Load screen
Select a panel number.
3
Change
values.
Move among
digits.
Accept the setting with the
key or cancel with the key.
4
Change the range with the
and keys.
2
1
2
Perform action with an F key.
1
Select the mode with an F key.
When the measurement terminal setting
is MUX (multiplexer): Select a channel.
P.3/3 is only displayed on
the RM3545-02.