Hioki RM3545-02 - Holding Measured Values

3.5 Checking Measured Values
60
The auto-hold function provides a convenient way to check measured values. Once the
measured value stabilizes, the beeper will sound, and the value will be automatically held.
The auto-hold function setting applies to all channels. (RM3545-02 only)
Holding Measured Values
1
Open the Settings Screen.
2
Open the Measurement Setting Screen.
3
Enable the auto-hold function.
4
Return to the Measurement screen.
5
While the measured value is being held, the HOLD indicator will light up.
The Settings screen
appears.
Switch the function menu
to P.2/3.
1
2
Move the cursor to the
[MEAS] tab with the left and
right cursor keys.
2
ON
OFF (default)
Selection
1
Return to the
Measurement screen.