12.2 Printing
245
12
Statistical calculation results can be printed when statistical calculation is enabled (ON). To
print, select PRINT on the screen or turn ON the instrument’s EXT I/O connector’s PRINT
signal (short it with the ISO_GND pin).
To enable statistical calculation:
See: "5.3 Performing Statistical Calculations on Measured Values" (p. 111)
If no valid data exists, only the data count is printed. When only one valid data sample
exists, standard deviation of sample and process capability indices cannot be printed.
Printing Statistical Calculation Results
(When statistical calculation is enabled)
To Next Page
Loading...
