Do not use the instrument if
damage is found, as electric
shock or short-circuit accidents
could result. Contact your autho-
rized Hioki distributor or reseller.
Metal Exposed
Is the power cord insulation torn, or
is any metal exposed?
1
Before using the instrument for the first time, verify that it operates normally to
ensure that no damage occurred during storage or shipping. If you find any dam-
age, contact your authorized Hioki distributor or reseller.
Peripheral Device Inspection
Is the insulation on a measurement
lead torn, or is any metal exposed?
No Metal Exposed
If there is any damage, measured
values may be unstable and
measurement errors may occur.
Replace the cable with an un-
damaged one.
Metal Exposed
No Metal Exposed
If damage is evident, request re-
pairs.
Yes
Is damage to the instrument evi-
dent?
Instrument Inspection
When turning power on
Is the STANDBY key red or green?
No
2
The power cord may be dam-
aged, or the instrument may be
damaged internally. Request re-
pairs.
After the completion of the self-test
(when the model number is shown
on the screen), is the Measure-
ment screen displayed?
No
Yes
The instrument may be damaged
internally. Request repairs.
See: "14.1 Troubleshooting" (p. 284)
"Error Displays and Remedies"
(p.296)
An error indication
occurs
Yes
Inspection complete
To Next Page
Loading...
