Shortest measurement times when using the external trigger source or when continuous measure-
ment off (non-free-run)
LP OFF (unit: ms), tolerance: ±10%±0.2 ms, Values in parentheses on the second row apply when OVC is on.
LP ON (unit: ms), Tolerance: ±10%±0.2 ms, Only with OVC on
Shortest conditions
Delay: 0 ms, TC: ON, Comparator: ON, Average: OFF, TRIG logic setting: ON,
Self-Calibration: MANUAL, Contact improver: OFF, Scaling: OFF,
Measured value display switching: None (With LP: ON, OVC is fixed to on. With LP: ON and measurement
speed: SLOW2, the number of average iterations is fixed to 2.
Range
100 M range
high-precision
mode
Measure-
ment
Current
FAST MEDIUM
SLOW1 SLOW2
50 Hz 60 Hz 50 Hz 60 Hz
10 m − −
41 61 58 141 241
(82) (121) (115) (281) (481)
100 m
− High
41 61 58 141 241
(82) (121) (115) (281) (481)
− Low
2.5 23 19 103 203
(4.6) (44) (38) (204) (404)
1000 m
− High
2.2 22 19 102 202
(4.0) (44) (37) (204) (404)
− Low
2.0 22 19 102 202
(3.6) (43) (37) (203) (403)
10
− High
2.2 22 19 102 202
(4.0) (44) (37) (204) (404)
− Low
2.0 22 19 102 202
(3.6) (43) (37) (203) (403)
100
− High
2.8 23 20 103 203
(5.2) (45) (38) (205) (405)
− Low
2.0 22 19 102 202
(3.6) (43) (37) (203) (403)
1000 − −
3.0 23 19 103 203
(5.6) (45) (38) (205) (405)
10 k − − 13 33 30 113 213
100 k − − 21 41 38 121 221
1000 k − − 151 171 168 251 351
10 M − − 591 588 591 588 671 771
100 M
ON − 1321 1318 1321 1318 1401 1501
OFF − 321 318 321 318 401 501
1000 M OFF − 421 418 421 418 501 601
Range
FAST MEDIUM
SLOW1 SLOW2
50 Hz 60 Hz 50 Hz 60 Hz
1000 m 71 65 111 98 431 1262
10 111 105 151 138 471 1342
100 111 105 151 138 471 1342
1000 113 107 153 140 473 1346