Hioki RM3545-02 - Page 356

Appendix 21 Instrument Settings (Memo)
A44
When you return your instrument to be calibrated or repaired, its settings will be reset to
their default values.
It is recommended to make note of the instrument's settings using the following table before
sending it to be calibrated or repaired. Settings can also be saved to a computer by using
the sample application software.
The sample application can be downloaded from the Hioki website (http://www.hioki.com).
Appendix 21 Instrument Settings (Memo)
Screen Setting and Key Setting
Measurement screen COMP
PANEL
AUTO
 (RANGE)
SPEED
Measurement screen
(P.1/2) (For the RM3545-02, P.1/3)
VIEW (F2)
Measurement screen
(P.2/2) (For the RM3545-02, P.2/3)
0 ADJ (F2)
LOCK (F3)
Measurement Screen
(P.3/3)
*2
FRONT (F1)
MUX (F2)
SCANSET (F3)
Setting
screen
(SETTING)
Multiplexer Channel
Settings screen
(MUX1)
*2
CH
TERM
INST
0ALL
0ADJ
Multiplexer Basic
Measurement screen
(MUX2)
*2
SPD
RANGE
UPP/REF
LOW%
PASS