Installation GRS103
Release
01
03/2022
21
5 Description
5.1 General device description
The GRS103 device is a managed switch with up to 22 × 10/100 Mbit/s
Twisted pair ports and 4 × 10/100/1000 Mbit/s Combo ports. The GRS103
variants consist of either a single device, or – depending on the device
variant – a basic device with up to 2 × pluggable media modules.
The modular GRS103 device variant uses the M1 family of media modules,
which are also compatible with MACH102 devices.
The device meets the relevant industry standards, provides very high
operational reliability, even under extreme conditions, and also long-term
reliability and flexibility.
The device allows you to set up switched Industrial Ethernet networks
according to standard IEEE 802.3.
You can choose from a wide range of variants. You have the option to set up
your device individually based on different criteria:
Number of ports
Transmission speed
Types of connectors
Temperature range
Supply voltage range
Certifications
Software level
Modularity
The device works without a fan.
If desired and depending on the device variant, the power can be supplied
redundantly.
The following installation options are available:
Horizontal mounting in a 19" rack
Horizontal mounting on a flat surface
Vertical mounting on a flat surface
Desktop device
You have the option of choosing various media to connect to the end devices
and other network components:
Twisted pair cable
Multimode F/O
Singlemode F/O
To Next Page
Loading...
Need help?
General
