Installation GRS103
Release
01
03/2022
37
This port supports:
Full or half duplex mode
Default setting: Full duplex
Note: Verify that the LH ports are connected only with LH ports, SM ports
only with SM ports, and MM ports only with MM ports.
5.5.6 100/1000 Mbit/s Combo port
This port is a combo port SFP slot.
The 100/1000 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX/1000BASE-SX/1000BASE-LX
standard.
This port supports:
Autonegotiation
Full duplex mode
Delivery state: Autonegotiation activated
Verify that you connect LH ports only with LH ports, SX ports only with SX
ports, and LX ports only with LX ports.
5.6 Display elements
After the supply voltage is set up, the Software starts and initializes the
device. Afterwards, the device performs a self-test. During this process,
various LEDs light up.
5.6.1 Device status
These LEDs provide information about conditions which affect the operation
of the whole device.
To Next Page
Loading...
Need help?
General
