Items Specifications
KVM connector 1 (VGA / COM / USB2.0 /
2port)
3
DCMI (Data Center Management Interface) Supported
Power consumption Maximum: 855 W(including
HDDs and mezzanine
cards)
External dimensions (width x depth x height) 435.3 mm x 492.7 mm x
55.5 mm (2S)
Weight
Maximum: 13.8kg
4
Note:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2. The mezzanine card slot 1 and slot 3 are used exclusively with an onboard LAN.
3. In SMP configuration between blades, VGA and COM are not available and only USB
port is available on non-primary server blades.
4. The Weight of a server blade includes that of SMP connection board.
Table A-6 CB 520X B3 - CPU specifications
Items Specifications
Supported CPUs E7-8880 v4 E7-8890v4 E7-8893v4
Number of cores 22 C 24C 4C
CPU frequency 2.2 GHz 2.2 GHz 3.2 GHz
QPI frequency 9.6 GT/s 9.6 GT/s 9.6 GT/s
L3 Cache 55 M 60 M 60 M
TDP 150 W 165 W 140 W
Number of CPUs Maximum: 2
Table A-7 CB 520X B3 - blade specifications
Items Specifications
Main Memory DIMM type (per slot) DDR4 RDIMM: 16 GB, 32
GB, 64 GB
Operating mode Independent Mode
(Default), Lockstep Mode,
Rank Sparing Mode,
Mirrored Memory Mode
Number of slots 48
Memory capacity Maximum:
1,536 GB (32 GB x 48)
3,072 GB (64 GB x 48)
A-6
System Unit Specifications
Hitachi Compute Blade 2500 Series Getting Started Guide
To Next Page
Loading...
