Items Specifications
Memory frequency 1600 / 1866 MT/s
Inter-blade SMP (Symmetric MultiProcessing) 2-blade SMP / 4-blade SMP
HDD/SSD Number of HDDs Maximum: 2
Capacity
1
Maximum: 3.6 TB
I/O Internal disk I/F Controller LSI SAS 3004
I/F SAS
Number of I/F Maximum: 2
RAID function RAID 0, 1
VGA Resolution 640x400 - 1680x1050
Refresh rate 60 - 85 Hz
Bit per pixel 8, 16, 32
Internal USB port USB2.0 x 2port (For LPAR
manager)
Onboard LAN
2
Midplane I/F 10Gbps 4 port converged
network adapter
Functions Wake on LAN, PXE boot,
iSCSI, FCoE
Mezzanine card
slot
2
Number of slots 4
Management function Remote console Supported
COM Serial redirection
DC input supply voltage DC + 12 V
Front interface USB
1 (USB 3.0)
3
KVM connector 1 (VGA / COM / USB2.0 /
2port)
3
DCMI (Data Center Management Interface) Supported
Power consumption Maximum: 770 W
(including HDDs and
mezzanine cards)
External dimensions (width x depth x height) 435.3 mm x 492.7 mm x
55.5 mm (2S)
Weight
Maximum: 13.8kg
4
Note:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2. The mezzanine card slot 1 and slot 3 are used exclusively with an onboard LAN.
3. In SMP configuration between blades, VGA and COM are not available and only USB
port is available on non-primary server blades.
4. The Weight of a server blade includes that of SMP connection board.
System Unit Specifications
A-7
Hitachi Compute Blade 2500 Series Getting Started Guide
To Next Page
Loading...
