Available functionality Menu Command
Set the key for
canceling the single
cursor state.
Tools
menu
Session Options command
When you execute this command,
the Session Options dialog box is
displayed. Select the Mouse tab,
and from the Single Cursor-
Termination Key drop-down list,
specify the key for canceling the
single cursor state.
Set the mouse
mode according to
the operating
system on the
server blade
displayed in the
remote console.
Tools
menu
Session Options command
In the dialog box, select the
Mouse tab, and from the Mouse
Acceleration options, select the
appropriate mouse mode
3
for the
operating system running on the
server blade.
If the operating system of the
server blade is Windows or Red
Hat Enterprise Linux 6 or later
Select the Absolute radio
button.
If the operating system of the
server blade is Red Hat Enterprise
Linux 5 or older, or any version of
Linux other than Red Hat
Enterprise
Select the Relative (Linux
Acceleration) radio button.
Functionality
related to virtual
media
Start the virtual
media console.
Tools
menu
Launch Virtual Media command
Functionality
related to the
power operation of
the server blade
4
Power on the
server blade.
Power
menu
Power On command
Power off the
server blade.
Power
menu
Forced Power Off command
If the operating system is running
correctly, never execute this
command. Executing this
command might cause the
operating system to not start or
result in corrupted data.
Reset the server
blade.
Power
menu
Hard Reset command
Other functionality Display version
information on the
remote console.
Help
menu
About command
Exit the remote
console.
File menu Exit command
Notes:
1. If the resolution setting for the VGA window of the server blade exceeds that of the
system console window, the Full Screen command cannot be executed.
Functionality and Operation of the Remote Console
5-9
Hitachi Compute Blade 2500 Series Getting Started Guide
To Next Page
Loading...
Need help?
General